Kak Industry

KAK Black Pistol Blade & Shockwave Buffer Tube KitIncluded in this KAK pistol blade and KAK Shockwave buffer tube kit is everything you'll need for finishing your build of a new AR15 pistol. Designed with holes for easy attachment and blade adjustment, the Shockwave is specially designed to pair perfect with KAK blades. Each component is black anodized for a strong durable finish that's corrosion resistant and more reliable over regular use, and we're pleased to offer the entire kit at a great sale price.

KAK Shockwave Pistol Stabilizing Blade + KAK Buffer Tube Kit - FDEThis KAK Flat Dark Earth pistol blade and KAK Shockwave buffer tube kit comes with everything you need to finish your AR-15 pistol build. The KAK buffer tube is designed with holes that allow you to attach and adjust your blade more securely. Comes with:KAK Shockwave Blade Pistol Stabilizer - FDEKAK Shockwave Buffer Tube (SPECIALLY DESIGNED FOR ADJUSTING KAK BLADE)Carbine buffer (2.9oz)Carbine buffer springCarbine stock end plateCarbine stock lock ring-castle nut MPN#: SHOCKWAVE-BLADE-TUBE-KIT-FDE

Description - KAK Produced 304 Stainless Body - 2.5: Long - Weight: 3.5 oz - Steel Internal Sliding Weights For Use In Standard Ar15 Carbine Tubes Using The Correct Lr-308 Carbine Buffer Spring Weight 56 oz UPC 2664 SKU: 2664

If you're searching for a quality upper receiver that provides superior performance with more features you'll expect to see for the price, KAK Industries offers a sixteen-inch complete upper that's chambered to handle the 5.56 NATO round. This KAK upper receiver is a lightweight solution with a lower profile that guarantees exemplary performance for years. Features: - Barrel: 8 Inches - Caliber: 5.56 NATO - A2 Flash Hider - Pistol Length Gas System - 9" M-LOK Handguard - Bolt Carrier Group

SKU KAKBRACERETAIL Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits the KAK shockwave tube. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.

This MICRO .308 flash can works great as a linear compensator, which directs your rifles blast, noise and escaping gases down range. These 308 linear comps are perfect for SBR / pistol 300 blackout builds, or any short barrel AR that shoots a projectile that is 7.62 or smaller. This slim line design follows the KX5 diameter and will fit under most handguards and rails that the original flaming pig would otherwise not fit under. 1.200" DIA 1.750" LONG 6061 ALUMINUM BLACK HARD ANODIZED FINISH 1.53 OZ. 3/4" WRENCH FLATS THREADED 5/8-24 FOR 30 CALIBER OR SIMILAR WEAPONS

KAK Shockwave brace $35

Want to see ALL of our Gun.Deals Exclusive Prices? CLICK HERE TO CHECK OUT ALL THESE DEALS FEATURES: Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25 in diameter) AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc. Available in black and flat dark earth (this listing is for black) Quick and easy to install Provides additional support during firing Weighs a scant 5.0 ounces ATF approved for pistol use Veteran designed, engineered, marketed, and sold

Ak Ar15 Lower Parts Kit Features Kak Produced Parts Throughout Mil Spec Trigger Group Kak Billet Trigger Guard Included! Standard A2 Handle Kak Black Oxide Springs 100 Percent Usa Specifications for KAK AR-15 Lower Parts Kit: Gun Model: AR-15

The KAK Industry AR-15 lower parts kit is a one stop purchase to get everything you need to complete your first or tenth lower receiver. This AR-15 LPK is made up of Mil-Spec components for maximum compatibility with all lower receivers. It not only comes with the small springs, detents, and pins, but also a Mil-Spec trigger group, A2 pistol grip, and a billet machined trigger guard. The trigger guard is enlarged to give you enough room to pull the trigger if you are wearing gloves. This Mil-Spec complete lower parts kit by KAK Industry is an affordable way to complete your build.

The KAK Industry AR-15 MIL-SPEC Carbine Buffer Tube offers a quality option for mounting a MIL-SPEC carbine stock to your AR-15. This AR-15 Carbine Buffer tube is made in-house at KAK using 7075 impact extrusions and features a durable hardcoat anodized finish. With six positions to choose from, you can adjust accordingly for the perfect length of pull for nearly any shooter. Features: - Six position - Mil-spec carbine buffer tube - 7075 impact extrusions - 3.7 oz Back Specifications Brand: KAK Industry Platform: AR-15 Weight: 3.7 Oz MPN#: AR-LP-150

KAK Industry 5.56 NATO Melonite AR-15 Barrel is a great option for the budget builder that values performance at an affordable price. This 13.9-inch barrel with taper profile features a 5.56 NATO chamber allowing 5.56 NATO calibers or .223 Remington calibers to be fired safely. Featuring a mid-length gas system, the 5.56 NATO Melonite AR-15 barrel is compatible with mid-length gas tubes. The KAK Industry 5.56 NATO Melonite AR-15 Barrel features 41V50 steel construction and is Melonite treated for superior performance and dependable use.

Caliber 5.56 Length 4.75" Finish Matte Blasted Grey Gas System Length Micro Gas Block Journal .750" Dimpled? Yes Twist Rate 1:5 Muzzle Thread 1/2x28 TPIGas Tube Specs: MICRO LENGTH GAS TUBE THIS GAS TUBE IS 1.5 INCHES SHORTER THAN A PISTOL GAS TUBE FOR CUSTOM AND SPECIAL PURPOSE BUILDS ***MICRO GAS BARRELS MAY REQUIRE SLIGHT MODIFICATION OF BARREL NUTS FOR CERTAIN RAIL SYSTEMS. SKU: KAK-SS-556-4.75-MICRO-GAS-TUBE UPC: 860006522389

The KAK Industry Compensator maintains the same size as an A2 birdcage while achieving remarkable performance. A closed face and gas ports in the upward position help direct expelled gasses to control muzzle climb and improve follow up shots. Back Specifications Brand: KAK Industry Finish: Manganese Phosphate Material: Steel - 4140 Chrome Moly Suppressor Mount: A2 Mount Thread Pattern: 1/2 X 28 Type: Compensator MPN#: KAK-COMP556

MMC Combos AR-15 80% Lower Build Kit featuring US Tactical's 80% Lower + KAK Industries Complete Mil-Spec Lower Parts Kit (LPK)

The KAK Industries A2 Birdcage flash hider is the old standard by which modern muzzle devices are measured. Combining excellent flash suppression and muzzle climb reduction with a minimal dust signature and blast, the A2 is easily one of the best muzzle devices available on the market. This 9mm caliber birdcage is threaded for 1/2x36 barrels. Back Specifications Brand: KAK Industry Finish: Manganese Phosphate Material: Steel Suppressor Mount: A2 Mount Thread Pattern: 1/2 X 36 Type: Flash Hider MPN#: KAK-A2-FLASH-9MM

The KAK Industries A2 Birdcage flash hider is the old standard by which modern muzzle devices are measured. Combining excellent flash suppression and muzzle climb reduction with a minimal dust signature and blast, the A2 is easily one of the best muzzle devices available on the market. This .30 caliber birdcage is threaded for 5/8x24 barrels. Back Specifications Brand: KAK Industry Finish: Manganese Phosphate Material: Steel Suppressor Mount: A2 Mount Thread Pattern: 5/8 X 24 Type: Flash Hider MPN#: KAK-A2-FLASH-308

The KAK Industry Four Prong Flash Hider is perfect for firearms enthusiasts looking for a high-quality muzzle device. With a 1/2-28 thread pitch and a length of 2.75 inches, this flash hider is perfect for 556 or similar caliber barrels. Weighing in at 3.7oz, this flash hider is lightweight, and perfect for use on rifles of all sizes.

Many AR15 budget builders will tell you finding the perfect low-profile gas block that will hold up to the rigors of high-volume shooting for an affordable price can be a challenge. As the durability of the gas block goes up, the price often does as well. That's why many AR15 owners who build or modify their rifles turn to KAK Industries, known for producing precision manufactured products at affordable prices. This Low Profile Gas Block from KAK is a primary example. Features: - Finish: Manganese Phosphate - Color: Black - Material: 4140 Chrome Moly - Platform: AR15

Against popular belief, flash hiders do not have to all look the same. Kak Industry has introduced a “saw” flash hider that adds a bit of excitement to your weapon. This flash hider has a 1/2x28 thread pitch. The sides of the flash hider are serrated and look like the blade of a saw. This gives your weapon a unique and aggressive look. The crush washers pictured are not included in the purchase and will need to be purchased separately. Features: - 1/2x28 thread pitch - Crush washer is not included and will need to be purchased separately