Veriforce Tactical

Made Of Steel Black Color Is A Phosphate Finish Spring, Rod, And C Clamp Included Red Is Cerakote Finish That Looks Anodized Fits All AR15 Mil-Spec Uppers USA Made

Designed To Conform To DOJ Criteria Skeletonized Cut Out Design Grip Screw And Washer Included Total Weight: 6.4 oz Ergonomic Design Machined From 6061 Billet Aluminum Anodized Black Finish Please Consult Local Laws & Regulations To Ensure Compliance

US Made M-LOK System Tight Fit Up Against Receiver, Allowing For A Monolithic Top Rail 7″ Carbine Length T6 Aluminum Body Gold Plated Finish Internal Diameter: 1.34″ Ultra Lightweight Proprietary Barrel Nut Included Heavy Duty Total Weight Including Barrel Nut Is 6.5 oz Rail System Slides Over Barrel Nut And Is Locked Up Against Receiver With 6 Screws

Made of German Stainless Steel (not flimsy like standard stainless steel at such a small thickness) A MUST have for any 1st time or experienced builder .07mm Thick Slides over your barrel and then your put your barrel nut over it Helps timing your barrel nut, so the proper torque specs are correct while lining up your gas tube hole Works with all AR15 barrels (does not work with .308 barrels)

Machined From 6061 Billet Aluminum Grip Screw And Washer Included Designed To Conform To DOJ Criteria Total Weight: 6.4 oz Please Consult Local Laws & Regulations To Ensure Compliance Ergonomic Design Anodized Gold Finish Skeletonized Cut Out Design

Our billet upper is made locally in Phoenix, in our facility. We start off from a solid block of 6061 aluminum and CNC it down to spec. A billet is much harder and more consistent than forged. Forged has a tendency to crack and loosen through wear and tear over time, while billet will last 5x longer than a forged upper. We now include all of our uppers with super durable billet. We Type 3 hard coat anodize our aluminum to make it almost as hard as steel.

Rainbow PVD Coated Finish Mag Catch Lever Enhanced Trigger Guard M-LOK Micro Angle Grip Extended Mag Catch Release Extreme Duty Wide Castle Nut For Carbine/M4 Buffer Tube Extended Take Down Pin Set Forward Assist Assembly 5.56 Charging Handle Anti-Rotation Pin Set Extended Bolt Catch Release Multi Degree Short Throw Ambidextrous Safety Gen 3 Gate

Handguard US Made Proprietary Barrel Nut Included M-LOK System Slides Over Barrel Nut And Is Locked Up Against Receiver With 6 Screws Internal Diameter: 1.34 T6 Aluminum Body Total Weight Including Barrel Nut Is 10.8 Oz Tight Fit Up Against Receiver, Allowing For A Monolithic Top Rail 15″ Extended Length Ultra Light Weight M-LOK System Heavy Duty Gold Plated Finish Stock High Density Polymer Just Released Weight Of Stock Shell: 5.4 Oz Total Weight Of Stock Kit: 15.2 Oz Micro Stock Design With Short Buttplate Light Weight

T6 Aluminum 1/2 X 28 Or 5/8×24 Threads Slips Over Barrel And Threads On 1.25″ Outside Diameter Holes Go All The Way Around Anodized Black or Anodized Red Finish 1/2×28 For 5.56, .223 Calibers, Etc.. Functions As A Barrel Shroud And Muzzle Compensator Covers About 3.25″ Of The Barrel Us Made In House 5/8×24 For .308, 300 Blackout, 6.5 Grendel Etc.. Generation 2 5.5″ Total Length

T6 Aluminum 5/8 x 24 Thread Multi Porting “Gatling Gun” Style Muzzle Comp Reduces Felt Recoil Up To 70 Percent Covers 4″ of Barrel, Extends Barrel 1.5″ OD: 1.1875″ US Made Length: 5.5″ .308/ 300 AAC Blackout Cal Slips over Barrel And Threads On Dual Purpose Unit, Functions As A Barrel Shroud And A Muzzle Compensator! Anodized Bronze Finish Weight: 6 Oz

Complete Pistol Buffer Tube Kit Matte Rainbow PVD Coated Finish US Made Castle Nut T6 Aluminum 3 oz Carbine Buffer & Spring Ambidextrous One Point Sling End Plate Foam Tube Cover Also Included

Complete Blue Rifle Build Kits Includes: Complete Stock with Anodized Blue Tube Anodized Blue Skeletonized Pistol Grip 15″ M-Lok Handguard in Anodized Blue Anodized Blue Charging Handle with Gen 5 Latch Anodized Blue Dust Cover in Billet Multi Ported Custom Muzzle Device Build Kit Details: 5.56 Caliber 16″ Chrome Moly Vanadium Nitride Barrel Forged 7075 Anodized Upper Nitride BCG Full Lower Parts Kit USA made

Complete Pistol Buffer Tube Kit Matte Rainbow PVD Coated Finish US Made Castle Nut T6 Aluminum 3 oz Carbine Buffer & Spring Ambidextrous One Point Sling End Plate Foam Tube Cover Also Included

Aero Precision 70/75 Forged Upper Receiver Comes with 10 Inch M-LOK ONLY (pictured with KeyMod) Made In Scottsdale, Arizona 16 Inch Nitride Barrel 1/7 Twist 6 Inch Socom Style Barrel Shroud Sits Flush With Hand Guard BCG & Charging Handle Not Included ($130 Extra) Black Nitride Gas Tube Part Of The Custom Shop Series

Our 5.56 16” stainless steel is made from 416r stainless steel. Our barrels are have a 12 step process that helps set us apart from the competition. Most of our competitors only use 8 processes or use inferior stainless steel. The 416r is perfect for handling accuracy and durability, but don’t beat it up, stainless steel is not a load and dump lots of ammo kind of barrel. Stainless steel will last 50,000 rounds, but you cannot let the barrel get too hot. It also can get better grouping over time, unlike our nitride barrels that stay the same groupings for about 15,000 rounds average lifespan.

We spare no detail in production! Our skeleton grip is a 6061 billet block that we mill down to size and it has a bead blasted purple anodized finish that looks amazing and feels great. There is no better deal for aluminum grips than our AR-15 skeleton grips. We mill out a solid bar block for our mil-spec buffer tube, we do not cut corners by buying hollow bar stock and capping the end like most manufactures do. This creates a sturdier and safer fixed length stock tube that you can trust.

Basics AR-15 5.56 Rifle Upper Set “Trump MAGA” Limited Edition In Red, Gold, Black, Or Blue Limited Lifetime Warranty ALL YOU NEED IS A LOWER, LOWER PARTS KIT AND BCG PLUS CHARGING HANDLE TO COMPLETE THE RIFLE Headspace Verified Built By Veriforce Tactical Upper Receiver M4 Feed Ramps T6 Forged USA Made 1913 Picatinny Rail Flat Top Matches To Any Lower Handguard US Made Anodized Red, Gold, Black, Or Blue Rail System Slides Over Barrel Nut And Is Locked Up Against Receiver With 6 Screws Heavy Duty T6 Aluminum Body

45/90 Degree options US Made Anodized Blue Finish Ambidextrous 5.56 Cal/.308 Cal Multiple Degree Variations Allen Wrench Included Notches On Both Sides Short Throw Levers With Paddle Each Side To A Different Degree If Desired Lightweight

Our Billet Upper Is Made Locally In Phoenix, In Our Facility. We Start Off From A Solid Block Of 6061 Aluminum And CNC It Down To Spec. Billet Is Much Harder And More Consistent Than Forged. Forged Has A Tendency To Crack And Loosen Through Wear And Tear Over Time, While Billet Will Last 5x Longer Than A Forged Upper. We Now Include All Of Our Uppers With Super Durable Billet. We Type 3 Hard Coat Anodized Our Aluminum To Make It Almost Has Hard As Steel.

Assembled By Veriforce Tactical A2 Style Flash Hider Does NOT Come With Bolt Carrier Group And Charging Handle 7.5″ Stainless Steel 1:7 Pistol Barrel Carbine Length Quad Rail Pistol Length Gas System USA Made Forged Upper Receiver Mil-Spec Picattiny Rails By Guntec USA (No Longer Laser Engraved On Side) Limited Warranty