Shockwave
User posted deals for Shockwave
(28 deals found)
Filter
17 months ago
KAK Shockwave Dimpled Pistol Buffer Tube Kit
This KAK Shockwave Pistol Buffer Tube Kit is specially designed with notches, which enables you to adjust your KAK Pistol Blade. The set screw that holds the Shockwave Stabilizing Brace aligns with the dimples in the buffer tube.
Comes with:
KAK Shockwave Buffer Tube
Carbine buffer (2.9oz)
Carbine buffer spring
Carbine stock end plate
Carbine stock lock ring-castle nut
- UPC:
- MPN: SHOCKWAVE-TUBE-KIT
25 months ago
Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation. This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand.
- UPC:
- MPN:
Brownells
8360
35 months ago
$332.99
Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.
- UPC:
- MPN:
Brownells
4264
35 months ago
The new Shockwave Technologies Blade Pistol Stabilizer 2M is made from the same high-strength polymer with the same general design, except it is designed to fit on standard AR-15 pistols with Mil-Spec buffer tubes. It slides right on and features a lever that allows you to adjust the length of pull. This stabilizing brace allows you to build a compact AR pistol without breaking the bank. Also compatible with anything that can use a Mil-Spec AR-15 buffer tube.
- UPC:
- MPN: KAK-SHKWV-BLK-2M
35 months ago
The Shockwave Technologies Blade Pistol Stabilizer is a lightweight, ergonomic, BATFE approved AR-15 pistol enhancement. This high-strength polymer brace fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25" in diameter), for a secure, worry-free fit.
NOTE: This pistol stabilizing brace will not fit non-standard pistol tubes or tubes greater than 1.25" in diameter. Attempting to do so could result in damage to the product.
Features:
- Polymer construction
- BATFE approved for pistol use
- Weight: 5 oz
- Made in the U.S.A.
- UPC:
- MPN: KAK-SHKWV-BLK
35 months ago
The Shockwave Technologies Blade Pistol Stabilizer is a lightweight, ergonomic, BATFE approved AR-15 pistol enhancement. This high-strength polymer brace fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25" in diameter), for a secure, worry-free fit.
NOTE: This pistol stabilizing brace will not fit non-standard pistol tubes or tubes greater than 1.25" in diameter. Attempting to do so could result in damage to the product.
Features:
- Polymer construction
- BATFE approved for pistol use
- Weight: 5 oz
- Made in the U.S.A.
- UPC:
- MPN: KAK-SHKWV-FDE
37 months ago
,
by Dealer
https://www.kakindustry.com/kak-shockwave-2-0-package-fde
KAK SHOCKWAVE 2.0 PACKAGE - FDE
SKU KAK SHOCKWAVE 2.0 PACKAGE - FDE
If you don’t have a buffer tube on your pistol, here is everything you need to add the Shockwave Blade 2.0 pistol stabilizing system to your firearm—all in one convenient package:
Shockwave Blade 2.0 Pistol Stabilizer
KAK tube
Castle nut
Mil-spec receiver endplate
Carbine buffer spring
Standard carbine buffer
$10 Off! No coupon needed
- UPC:
- MPN:
KAK Industry LLC
200
39 months ago
With AR-15 pistols becoming extremely popular, many companies have come up with products to make it easier to shoot the AR-15 like a handgun. The Shockwave Blade Pistol Stabilizer is made from glass-reinforced polymer and attaches to your AR-15 pistol buffer tube. It is not classified as a stock by the ATF, so you can attach it to pistols with barrels shorter than 16". It allows you to brace against your forearm with the vertical fin so you can easily shoot one handed or even stabilize it against your cheek for more accurate shots.
- UPC:
- MPN: KAK-SHKWV-BLK-KIT2
60 months ago
The Shockwave Technologies Raptor Grip is MADE IN AMERICA. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.
This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.
The Raptor Grip is molded of a super-tough glass-filled polymer and fits:
- UPC:
- MPN:
Delta Team Tactical
1216
61 months ago
Quick Overview
free shipping Free Shipping applies to this item only and not the entire order.
SKU: 5165448970
UPC: 5165448970
MFR#: 5165448970
- UPC:
- MPN: 5165448970
62 months ago
,
by Dealer
Shockwave Blade (Black, FDE, OD Green, Grey + 5 New Colors) + Full Kit - $55 + $5 Flat Rate Shipping
$55.00
Includes:
KAK Shockwave Blade (Black | FDE | OD Green | Grey +5 New Colors)
KAK Shockwave Blade Dimpled Buffer Tube
KAK Carbine Buffer
KAK Carbine Chrome Silicone Buffer Spring
KAK Endplate
KAK Castle Nut
- UPC: 029882157381
- MPN:
66 months ago
,
by Dealer
FREE AND SAME DAY SHIPPING ON ALL PRODUCTS IN OUR STORE.
This is a package for the Shockwave Blade Pistol Stabilizer and Kak Shockwave Tube
SHOCKWAVE BLADE PISTOL STABILIZER
- UPC:
- MPN:
npfreedom.com
20838
66 months ago
,
by Dealer
FREE SHIPPING ON ALL PRODUCTS ON THIS SITE
Made from high-strength glass-reinforced polymer, the Blade 2.0 is manufactured to exacting tolerances and fits all pistols equipped with a proprietary carbine-style buffer tube (included), manufactured by KAK Industry. Just slip it on and lock in place. Adjusts with a simple finger lever.
Fits all pistols equipped with a standard KAK buffer tube (included): AR-15 pattern, MPX, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.
-Available in black
-Quick and easy to install.
-Provides additional support during firing.
- UPC:
- MPN: Shockwave
71 months ago
SHOCKWAVE BLADE PISTOL STABILIZER - Black - $30 - https://www.schuylerarmsco.com/4th-of-july-sale/shockeave-blade-parts-and-kits-993/shockwave-blade-pistol-stabilizer-black-19-993
SHOCKWAVE BLADE PISTOL STABILIZER - FDE w/ standard completion kit - $65 - https://www.schuylerarmsco.com/4th-of-july-sale/shockeave-blade-parts-and-kits-993/shockwave-blade-pistol-stabilizer-fde-w-standard-completion-kit-9935637
- UPC:
- MPN:
Schuyler Arms
1055
72 months ago
Shockwave Blade Pistol kit with Anderson Lower Parts kit.
Features:
– Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.
- KAK dimpled buffer tube
- Aero Precision castle nut, end plate, spring and buffer
– Available in black
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use
– Veteran designed, engineered, marketed, and sold
– Made in U.S.A.
-Complete Anderson Lower Parts kit
- UPC:
- MPN:
Schuyler Arms
517
73 months ago
,
by Dealer
GET IT FAST! At HaulBrass.com most orders ship same day.
ALSO AVAILABLE IN FDE
The KAK Shockwave Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.
- UPC: 029882157381
- MPN: KAK-SHKWV-BLK
77 months ago
Shipping is a little over $4 for one.
Endo only brace is $35 shipped at https://www.endotactical.com/products.html
- UPC:
- MPN:
85 months ago
SHOCKWAVE BLADE PISTOL STABILIZER - Black w/ standard buffer
Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.
- UPC: 029882157381
- MPN:
90 months ago
,
by Dealer
8/11/17: Orders placed from 8/11/17 - 8/25/17 will be shipped on 8/26/17.
The store is on vacation.
------------------------------------------------------
Free shipping! Same day shipping if you order before 4pm!
SHOCKWAVE BLADE PISTOL STABILIZER
Features:
– Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.
– Available in black and flat dark earth (this listing is for black)
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
- UPC: 029882157381
- MPN: 15738
95 months ago
$20.00
Features -
12 length adjustment settings.
Anti-rotation and anti-thrust design stays put without sliding forward or spinning.
Tube is flush with rear of SHOCKWAVE BLADE when fully collapsed.
When fully adjusted out the assembly is very rigid..
Strong CASTLE NUT design accepts all mil spec endplates and any aftermarket endplate.
Accepts all carbine buffer systems..
4.8 OZ
7.25 TOTAL OVERALL LENGTH
- UPC:
- MPN:
KAK Industry LLC
1331