Bravo Company

THESE ARE USED/DEMO UPPER RECEIVER ASSEMBLIES. All will have several nicks, scratches, and marks on exterior finish. NO HANDPICKING. This receiver has the M4 feedramps machined in. This is to be used with barrels that include the M4 barrel extension. Built to the correct Mil-Specs. (Inside Diameter for barrel extension slightly undersized for a tighter fit to the barrel and a more accurate rifle. Please use a heat gun or hair dryer to warm up threaded bore of receiver if barrel extension is too tight.)

BCM-MK2-RE-COSMO ***COSMETIC BLEM*** (Scratches or scuffs) Packaged in Bulk Our BCM MK2 Receiver Extension for your AR15, M16, M4. Machined from 7075T6 and manufactured to Mil-Spec dimensions and specifications. Mil-Spec receiver extensions have a slightly smaller dimension where the stock slides on. Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 These tubes should be used with stocks such as USGI, BCM®™, Colt, LMT, SOPMOD, VLTOR, Stag Arms, and others that a made to the Mil-Spec size. THESE RECEIVER EXTENSIONS CAN ALSO BE USED ON MOST AR-10s.

BCM-GFC-MOD-0-556-COSMO DESCRIPTION ***COSMETIC BLEM*** (Scratches or scuffs) Packaged in Bulk Designed to reduce muzzle rise, noise, and lateral pressure. The BCM®™ Compensator Mod 0-5.56 Tuned slots and interior cone offer recoil mitigation and compensation of muzzle-rise. Designed to have less side blast and noise associated with typical compensators. Nitride treated for maximum corrosion resistance Includes a Crush Washer Should be installed by a qualified armorer. Threaded 1/2 x 28 for 5.56mm AR15 platforms. Not a flash hider Please note:

bcm-gtg-mod-0-fg The BCM®™ Trigger Guard AR-15 Type Series Trigger Guard, Mod 0 Ergonomically correct shape and contour No sharp edges, which enhances shooter s comfort Compatible with duck-billed grips Made of impact resistant polymer Like all BCM® products- Made in the USA Includes set screw and roll pin * Professional installation by a qualified gunsmith is required

COSMO-BCM-MK2-URG-MID-14-MCMR-13 COSMETIC BLEM UPPER RECEIVER GROUP. Please no returns due to cosmetic blemishes. *Cosmetic blemishes do not affect fit or functionality of the upper group. All BCM upper groups are head spaced and test fired for functionality prior to being offered for sale. All BCM® Upper Receiver Groups with a MCMR Handguard Include: One 3" Picatinny Rail Section One BCM MCMR Sling Mount Manufactured by Bravo Company MFG, Inc. (BCM)

THIS IS NOT A BCM PRODUCT (and does NOT go thru the BCM QC process). Quantities are limited. We aquired this as a surplus commerical spec AR15 Lower Parts Kit. A good option for a training or sporting rifle. Packed in bulk in a poly bag.

The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry.

Commercial-FIRING-PIN-AR15 THIS IS NOT A BCM PRODUCT (and does NOT go thru the BCM QC process). Quantities are limited.

BCM-GTG-MOD-0-BLK The BCM®™ Trigger Guard AR-15 Type Series Trigger Guard, Mod 0 Ergonomically correct shape and contour No sharp edges, which enhances shooter s comfort Compatible with duck-billed grips Made of impact resistant polymer Like all BCM® products- Made in the USA Includes set screw and roll pin * Professional installation by a qualified gunsmith is required

BCM-GTG-MOD-0-WG The BCM®™ Trigger Guard AR-15 Type Series Trigger Guard, Mod 0 Ergonomically correct shape and contour No sharp edges, which enhances shooter's comfort Compatible with "duck-billed" grips Made of impact resistant polymer Like all BCM® products- Made in the USA Includes set screw and roll pin * Professional installation by a qualified gunsmith is required

BCM-LGB-625-COSMO ***COSMETIC BLEM*** (Scratches or scuffs) Packaged in Bulk BCM® Low Profile Gas Block for AR15, M16, M4, M4A1. Machined of steel, phosphate finish, for .625 barrels. Manufactured within very tight Mil-Spec tolerances on all ID's. Barrel ID honed after finish per USGI TDP. Made by Bravo Company MFG, Inc. with set screw mounting. Set Screws are Steel 10-32 x 3/16 Knurled Cup Point

BCM-MCMR-SM-COSMO ***COSMETIC BLEM*** (Scratches or scuffs) Packaged in bulk. BCMGUNFIGHTER™ MCMR-SM Quick Detachable Sling Mount, (M-LOK® Compatible*) Low-Profile for increased mobility and decreased "snag" factor Compatible with M-LOK mounting system Fits standard push button, quick detach sling swivel (not included) 8-position (360°), non-rotational locking interface All steel construction Quick detach sling swivel not included. * M-LOK® is a registered trademark of Magpul Industries Corp.

***COSMETIC BLEM*** (Scratches or scuffs) Packaged in bulk. A Charging Handle for the 21st Century Gun Fighter A NEW Charging Handle and Extended Latch System Charging Handle forged from 7075 T6 Aluminum Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 GFH - Mod 3B (large latch) and Mod 4B (medium latch) The Mod 3X3 latches extend past the main body of the charging handle by approximately 1.14". The Mod 4x4 latches extend past the main body of the charging handle by approximately .91".

***COSMETIC BLEM*** (Scratches or scuffs) Packaged in bulk. The BCM®™'s Grip (GFG) features Reduced angle for improved ergonomics and trigger control Hinged trap door offering storage inside the grip with a water resistant rubber gasket Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise "beavertail" style back strap. Up to a quarter of an inch wider than the BCM® Mod 0 and Mod 1 grips. Made in the USA and manufactured from high quality impact resistant polymers.

COSMO-BCM-URG-MID-14-MCMR-13 About the BCM® Standard 14.5" Mid Length Complete Upper Receiver w/ MCMR-13 Handguard All BCM® Upper Receiver Groups with a MCMR Handguard Include: One 3" Picatinny Rail Section One BCM MCMR Sling Mount Manufactured by Bravo Company MFG, Inc. (BCM) These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.

The freefloating Bravo Company MCMR M-LOK Rail handguard eliminates external load on the barrel, reducing deflection for more accurate shooting. Featuring the same industry leading barrel nut and lock up design introduced on BCM's KMR handguard, the MCMR series of handguards delivers modularity for the M-LOK platform. Its proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12-o’clock rail and positions mounting hardware to mitigate movement caused by heat. Features: - 6061-T6 aluminum alloy - Free float handguard - M-LOK compatible

BCM® M4 Flat Top Upper Receiver with cosmetic blemishes. Most have scratches or scuffs. The upper comes unassembled, but complete with BCM forward assist assembly and ejection port cover door assembly. You must assemble it. (Assembly required) (all parts, but you will have to assemble together) THESE ARE USED/DEMO UPPER RECEIVER ASSEMBLIES. All will have several nicks, scratches, and marks on exterior finish. NO HANDPICKING. This receiver has the M4 feedramps machined in. This is to be used with barrels that include the M4 barrel extension. Built to the correct Mil-Specs.

NOTE: All BCM bolt carrier groups are factory test fired. The BCG may show handling marks consistent with these quality control procedures. The Bravo Company Manufacturing Bolt Carrier Group, with a parkerized exterior and chrome lined carrier interior, has been machined to USGI specifications. This M16/M4 carrier includes a properly staked gas key which has also been chrome lined, heat treated per MIL-SPEC, and secured to the carrier with grade 8 fasteners. Features: - MIL-SPEC carpenter no. 158 steel (bolt) - High pressure tested and magnetic particle inspected

The Bravo Company BCM Gunfighter Vertical Grip Mod 3 has a low-profile design for increased mobility and reduced chance of snagging. The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle. Mount in reverse to increase control when grabbing handguard and grip. Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations. Made in the U.S.A. from high quality, impact resistant polymers. bcm-gfg-mod-3-black Specifications Brand: Bravo Company Manufacturing Color: Black Material: Polymer

The Bravo Company Manufacturing BCMGUNFIGHTER MOD 3 Grip provides a reduced angle for improved ergonomics. Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise 'beavertail' style back strap. MOD 3 grips are up to a ¼ inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. A hinged trap door offers storage inside the grip sealed with a water-resistant rubber gasket. Manufactured from high quality, impact resistant polymers, and test fit to ensure proper function. Back Specifications Brand: Bravo Company Manufacturing